IAI offers complete system solutions, instead of building a robotics system from scratch, design engineers can purchase fully-functional units from IAI and begin production sooner. Their straightforward programming language and pre-formatted products make it easy to integrate IAI products with other components. Buying off-the-shelf Intelligent Actuator products is more cost-effective than building your own, and puts your project into production sooner With the introduction of a full range of ROBO Cylinders, IAI is also leading the transition away from pneumatics to cost-effective, low-maintenance, and fully-programmable electric cylinders.
Economical and easy to use, the ROBO Cylinder® is specifically designed to accomplish the simple tasks usually assigned to air cylinders, but with
greater flexibility and control. Offering custom control over position, speed, acceleration, deceleration, and torque, allowing for mid-move velocity changes, and control from a PLC, the ROBO Cylinder® is a versatile and easy-to-use alternative to pneumatic cylinders.
The ROBO Cylinder® is a flexible, intelligent, and economical, ballscrew linear actuator from Intelligent Actuator. The ROBO Cylinder ® offers:
- Multiple Positioning
- ±.02mm Repeatability
- Programmable Velocity Control
- Programmable Acceleration & Deceleration
- Programmable Torque Control (Push Function)
- 50mm to 1000mm Stroke Lengths
- 1mm/s to 1000mm/s Speed (Depends on Model)
- Serial I/O for linking up to 16 axes
- Long life expectancy (5,000km)
- Low Power Consumption (Compared to Air Cylinder Compressors)
ROBO Cylinders are available in a wide variety of configurations to suit the requirements of your specific application. The main variations are found in the basic body construction and the type of motor employed.
IX SCARA (Selective Compliant Assembly Robot Arm) robots are ideal for high speed, precision operations such as sealing, dispensing, parts insertion, assembly, and more.
- Best of Class variety of off-the-shelf SCARA robot models (cleanroom, water resistant, wall mount, & more)
- X-SEL® controller for exceptionally easy programming, calibration and troubleshooting
- Absolute encoders (standard)
- Profibus, DeviceNet, CC-Link, & Ethernet Network Communication
- Z-axis “Push” function for easy control of compression force and torque
- Award-winning path control and 3D path capability
- Interference check zones: User-defined outputs turn on when a zone is violated (you can set as many as 10 zones)
Vision compatible, Ethernet-ready, cleanroom, wall & ceiling mount models available. With 16 new SCARA models, integrating the IX SCARA robots into your design and application is now easier than ever!
Motorized Electric Grippers Achieve High Grip Force and Long Stroke in a Compact Body. IAI Grippers come in 2 Finger and 3 finger configurations. The slider type with a guide promises excellent rigidity, while the lever type
ensures easy gripping of the load because the levers open 180 degrees. Features include multi-positioning and adjustable grip strength.
The GRSS / GRLS series provides Cleanroom and dust proof solutions. The GRST Long Stroke series offers strokes up to 100m (4”) at speeds up to 75mm/s and provides high grip force of 40N, all with positioning repeatability of ±0.01mm (0.00039″)
RCP2-RT series motorized rotary actuators with maximum rotational angle of 300 to 360 degrees with 24V stepper motor or 230V servo motor. These rotary actuators feature speed and acceleration control for smooth starting and stopping. 512 points available for multi-positioning applications. Available in both vertical and flat types the RCP2 ROBO Cylinder Rotaries come in 3 sizes to fit your application.
Cleanroom type class 10, and Dust-proof IP54 type rotary actuators have been added to the ROBO Cylinder Rotary Actuator line. With the new versions we now have a solution whether you working in a class 10 cleanroom or a dusty, dirty working environment.
- 3 sizes, equipped with 24V stepper motor (RCP2).
- Horizontal or vertical construction.
- Standard stroke up to 330 degrees.
- Multiple-version to 9999 degrees.
- Maximum torque up to 4.6 Nm.
- Complete with controller (PCON).
IAI offers a wide range of linear actuator solutions including clean room and high speed high payload versions. The ballscrew-driven linear actuator is based on an extruded aluminum frame with a built-in linear motion guide system. An AC Servo motor provides closed-loop feedback to the motion controller. Replacing the ball screw with no-friction magnets, the Linear Servo (LS) series magnetic linear actuator delivers exceptional repeatability at ultra-high speeds. And if you are looking to dramatically reduce your cycle time, the LS magnetic linear actuator can accelerate or decelerate at an extremely fast 3G – much faster than even an advanced ball screw linear actuator. The IF is a belt-driven version of the IS Actuator. By combining the high moment loads of the IS with the speed of the FS, the IF Series has proven itself in providing torsional rigidity, reliability, and high speeds.
The ICS provides a complete system solution! The ICS usually consists of various combinations of the ISP or ISPD (Clean Room) high-performance actuators which feature exceptional speed, rigidity, repeatability, and payload capabilities. Additional possible combinations include those using Robo Cylinders, IF, and other series actuators.
An ICS is a complete system, including the high-performance X-SEL motion controller and all necessary brackets, cables, and cable management. Various communication options available on the X-SEL controller ensure smooth integration.
The competitively priced ROBO Cylinder IK Series is the multi-axes solution to your automation needs.The IK Series is offered in both pulse and servo motors. Choose the pulse motor for applications requiring high thrust at low speeds. Choose the servo motor for applications requiring constant thrust regardless of the operating speed. The ROBO Cylinder IK Series multi-axes kit includes everything needed for fast and easy assembly